英诺赛科充电器快充方案
添加时间：2021-11-29 点击次数：1118 【返回】
多口PD快充具有多个输出口，可以同时为手机和笔记本充电，很受市场欢迎。但是现在的100W快充，单一接口可以输出100W，连接其他接口后，输出功率会降低为65W或者45W，这就很影响快充体验了。针对100W快充降速的问题，英诺赛科推出了高功率密度的200W氮化镓3C2A多口快充参考设计，支持功率盲插，双C口输出时，都可以以100W满功率输出，不会影响快充体验，三个C口同时输出时，为100W+45W+45W，保证有一个C口可以满功率输出，保证使用体验的同时还可以为连接的设备尽可能的高速充电。
英诺赛科200W参考设计，在单口及双口输出时任意C口均可100W快充，充分满足大功率快充需求，A口支持30W快充。多口输出策略输出参数可以根据需求定制。英诺赛科200W氮化镓快充参考设计使用MPS二合一控制器HR1211配合英诺赛科氮化镓INN650D260A组成带PFC的LLC的恒压输出开关电源，次级采用MPS MP6924搭配安森美NTMFS5C628NL同步整流。C口与A口输出二次降压采用智融SW3516H和SW3515进行电压转换。
X
Multi port PD fast charging has multiple output ports, which can charge mobile phones and notebooks at the same time. It is very popular in the market. However, in the current 100W fast charging, a single interface can output 100W. After connecting other interfaces, the output power will be reduced to 65W or 45W, which will soon affect the fast charging experience. Aiming at the problem of 100W fast charging and speed reduction, innosecco has launched a 200W gallium nitride 3c2a multi port fast charging reference design with high power density, which supports power blind insertion. When double C-Port output, it can output 100W full power without affecting the fast charging experience. When three C-Ports output at the same time, it is 100W + 45W + 45W, ensuring that one C-Port can output full power, While ensuring the use experience, it can also charge the connected equipment as high as possible.
Fast charging scheme of innoseco charger
Fast charging scheme of innoseco charger
