1. 3x3x1mm small package integrates 3-axis gyroscope + 3-axis accelerometer + 3-axis electronic compass
2. Full range ± 250, ± 500, ± 1000, and ± 2000 ° / sec
3. Integrated 16 bit ADC
4. Gyro working energy consumption: 3.2mA
5. The working current of the accelerometer is 450 μ A
6. The geomagnetic working current at 8Hz is 280 μ A
1. Full range ± 250, ± 500, ± 1000, and ± 2000 ° / sec
2. Gyro working energy consumption: 3.2mA [br /] 3 The full grid sensing range of the accelerator is ± 2G, ± 4G ± 8g and ± 16g
4. The normal working current of the accelerator is only 450 μ A。
5. When the accelerator is in 0.98hz power saving mode, the current is only 6.37 μ A
1. Qm77033d is a multi-mode, multi band, high linear low band s-pad (switch + PA + duplexer) designed for the final amplification stage of multi-mode GSM / CDMA / edge / WCDMA / LTE / NR mobile cellular equipment. The high efficiency LB s-pad includes three amplifier paths with 3G / 4G / 5G low, 2G low and 2G high band frequencies, as well as switching outputs for multi band coverage.
2. Mipi RFFE control interface
1. The latest 6-axis (gyro + accelerator), low power consumption and low noise
2. Smaller package, 3 mm x 3 mm x0 75mm (16-pin LGA)
3. 512 byte FIFO
4. Gyroscope with full range of ± 250, ± 500, ± 1000, and ± 2000 degrees / sec
5. ± 2G, ± 4G, ± 8g, and ± 16g full range accelerometer
SGM5349A-16 digital-to-analog converter performance parameters
The 8-channel, 16-bit buffer voltage outputs the DAC
Power supply range of 2.7V to 5.5V, design to ensure monotony
Normal working power consumption: 0.8mA, off working power consumption: 1μA
External benchmark
Power-on reset to zero until a valid write operation is performed
Rail to rail output swing
Support multi-function three-line serial interface, support up to 50MHz clock frequency operation
/LDAC function, can update all DAC output at the same time, can also select the update channel
/CLR function, zero clear to programmable code (zero level, medium range or full range)
Green TSSOP-16 and TQFN-4×4-16L package
Operating temperature range: -40 ° C to +125 ° C
Advantages over mechanical switches
Fully integrated, programmable digital buttons
Standalone module design: Manufacturability for easy system integration
Configurable force threshold for each button
You can configure the button size according to the module size
Solid state button: no mechanical moving parts, no wear
Touch pattern recognition (single, double, triple beat, hold, etc.)
Direct interface to external haptic drivers/actuators
RGB backlight is integrated into the module
Typical application of SIC module in new energy vehicle
GaN application in new energy vehicle
Product Introduction
Founded in 2014, Mapson Semiconductor is headquartered in Nanshan District, Shenzhen, with r&d centers in Shenzhen and Shanghai.Is a set of RESEARCH and development, design, production, sales and service as one of the complete industrial chain company, a national hightech enterprise.Our products include medium and high power field effect tubes (all series of products from low voltage to high voltage, Trench MOS/SGT MOS/Super Junction MOS/ Planar MOS), SiC diode, SiC MOSFET and other products
Address: room 2105, block a, building 6, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen
Zip code:518057 Tel:0755-26544443 Fax:0755-2671107
Copyright © 2022 Upstar Technology (HK) Limited. 粤ICP备17138167号-1 Support:s-out Site map